# Documents/brltty.conf. Generated from brltty.conf.in by configure. ############################################################################### # BRLTTY - A background process providing access to the console screen (when in # text mode) for a blind person using a refreshable braille display. # # Copyright (C) 1995-2014 by The BRLTTY Developers. # # BRLTTY comes with ABSOLUTELY NO WARRANTY. # # This is free software, placed under the terms of the # GNU General Public License, as published by the Free Software # Foundation; either version 2 of the License, or (at your option) any # later version. Please see the file LICENSE-GPL for details. # # Web Page: http://mielke.cc/brltty/ # # This software is maintained by Dave Mielke . ############################################################################### # This is a configuration file template for the BRLTTY application. # Uncomment those entries which apply to your personal needs and system # requirements. # BRLTTY expects to find its configuration file in "/etc/brltty.conf" # (can be overridden with the -f [--configuration-file=] option). # If it doesn't exist, then BRLTTY silently continues but may require # that certain command line options be explicitly supplied. # Blank lines are ignored. The character '#', anywhere on a line, # initiates a comment; all characters from it to the end of that line # are ignored. # Each configuration entry consists of a keyword followed by its operand. # An arbitrary amount of white space, (blanks and/or tabs), may occur # before the keyword, as well as before and after the operand. Keyword # processing is not case sensitive. Examples of valid entries are: # # Braille-Driver pm # Papenmeier braille displays. # braille-device serial:ttyS0 # The first serial device. # SPEECH-DRIVER fv # The Festival Text to Speech System. # The default settings given within the following descriptions assume no # special build options (see "./configure --help" in the top-level # directory of the source tree. ############################ # Generic Braille Settings # ############################ # The braille-driver directive specifies the two-letter driver # identification code of the driver for the braille display. # If not specified, autodetection will be performed. # If more than one driver, separated by commas, is specified, # then autodetection will be performed amongst them. # (can be overridden with the -b [--braille-driver=] option) #braille-driver auto # autodetect #braille-driver al # Alva #braille-driver at # Albatross #braille-driver ba # BrlAPI #braille-driver bc # BrailComm #braille-driver bd # Braudi #braille-driver bg # B2G #braille-driver bl # BrailleLite braille-driver bm # Baum #braille-driver bn # BrailleNote #braille-driver cb # CombiBraille #braille-driver ce # Cebra #braille-driver ec # EcoBraille #braille-driver eu # EuroBraille #braille-driver fs # FreedomScientific #braille-driver hd # Hedo #braille-driver hm # HIMS #braille-driver ht # HandyTech #braille-driver hw # HumanWare #braille-driver ir # Iris #braille-driver lb # Libbraille #braille-driver lt # LogText #braille-driver mb # MultiBraille #braille-driver md # MDV #braille-driver mm # BrailleMemo #braille-driver mn # MiniBraille #braille-driver mt # Metec #braille-driver np # NinePoint #braille-driver pg # Pegasus #braille-driver pm # Papenmeier #braille-driver sk # Seika #braille-driver tn # TechniBraille #braille-driver ts # TSI #braille-driver tt # TTY #braille-driver vd # VideoBraille #braille-driver vo # Voyager, BraillePen/EasyLink #braille-driver vr # Virtual #braille-driver vs # VisioBraille #braille-driver xw # XWindow # The braille-device directive specifies the device to which the braille # display is connected. The generic syntax is type:device. The device # type is optional, and, for backward compatibility, defaults to serial. # The following devices are supported (brackets indicate optionality): # serial:path (relative paths are anchored at "/dev") # usb:[serial-number] # bluetooth:address # If not specified, "usb:" will be used. # If more than one device, separated by commas, is specified, # then each of them will be probed in turn. # (can be overridden with the -d [--braille-device=] option) braille-device serial:ttyS0 # First serial device. #braille-device usb: # First USB device matching braille driver. #braille-device usb:nnnnn # Specific USB device by serial number. #braille-device bluetooth:xx:xx:xx:xx:xx:xx # Specific bluetooth device by address. # # NOTE: If the device is connected via a serial-to-USB adapter then setting # braille-device to usb: will not work. In this case it needs to identify the # virtual serial device which the kernel has created for the adapter, i.e. to # something like serial:ttyUSB0 (see the kernel messages on device plug to get # the actual device name). # The release-device directive specifies whether or not the device to which the # braille display is connected is to be released when the current screen or # window can't be read by BRLTTY. If not specified, "on" will be used on Windows # platforms and "off" will be used on all other platforms. # (can be overridden with the -r [--release-device] option) #release-device on # Release the device. #release-device off # Don't release the device. # The text-table directive specifies which text table to use. Relative paths # are anchored at "/etc/brltty/Text". If not specified, locale-based # autoselection with fallback to "en-nabcc" will be performed. # (can be overridden with the -t [--text-table=] option) #text-table auto # locale-based autoselection #text-table ar # Arabic (generic) #text-table as # Assamese #text-table awa # Awadhi #text-table bg # Bulgarian #text-table bh # Bihari #text-table bn # Bengali #text-table bo # Tibetan #text-table bra # Braj #text-table brf # Braille Ready Format (for viewing .brf files within an editor or pager) #text-table cs # Czech #text-table cy # Welsh #text-table da # Danish #text-table da-1252 # Danish (Svend Thougaard, 2002-11-18) #text-table da-lt # Danish (LogText) #text-table de # German #text-table dra # Dravidian #text-table el # Greek #text-table en # English #text-table en_CA # English (Canada) #text-table en_GB # English (United Kingdom) #text-table en_US # English (United States) #text-table en-nabcc # English (North American Braille Computer Code) #text-table eo # Esperanto #text-table es # Spanish #text-table et # Estonian #text-table fi # Finnish #text-table fr # French #text-table fr_CA # French (Canada) text-table fr_FR # French (France) #text-table fr-2007 # French (unified 2007) #text-table fr-cbifs # French (Code Braille Informatique Français Standard) #text-table fr-vs # French (VisioBraille) #text-table ga # Irish #text-table gd # Gaelic #text-table gon # Gondi #text-table gu # Gujarati #text-table he # Hebrew #text-table hi # Hindi #text-table hr # Croatian #text-table hu # Hungarian #text-table hy # Armenian #text-table is # Icelandic #text-table it # Italian #text-table kha # Khasi #text-table kn # Kannada #text-table kok # Konkani #text-table kru # Kurukh #text-table lt # Lituanian #text-table lv # Latvian #text-table mg # Malagasy #text-table mi # Maori #text-table ml # Malayalam #text-table mni # Manipuri #text-table mr # Marathi #text-table mt # Maltese #text-table mun # Munda #text-table mwr # Marwari #text-table ne # Nepali #text-table new # Newari #text-table nl # Dutch #text-table nl_BE # Dutch (Belgium) #text-table nl_NL # Dutch (Netherlands) #text-table no # Norwegian #text-table no-generic # Norwegian (with support for other languages) #text-table no-oup # Norwegian (Offentlig utvalg for punktskrift) #text-table nwc # Newari (old) #text-table or # Oriya #text-table pa # Panjabi #text-table pi # Pali #text-table pl # Polish #text-table pt # Portuguese #text-table ro # Romanian #text-table ru # Russian #text-table sa # Sanskrit #text-table sat # Santali #text-table sd # Sindhi #text-table sk # Slovak #text-table sl # Slovenian #text-table sv # Swedish #text-table sv-1989 # Swedish (1989 standard) #text-table sv-1996 # Swedish (1996 standard) #text-table sw # Swahili #text-table ta # Tamil #text-table te # Telugu #text-table tr # Turkish #text-table vi # Vietnamese # The attributes-table directive specifies which attributes table to use. # Relative paths are anchored at "/etc/brltty/Attributes". If not specified, # "left_right" will be used. # (can be overridden with the -a [--attributes-table=] option) #attributes-table left_right # foreground colour in the left column and background colour in the right column #attributes-table invleft_right # inverse foreground colour in the left column and background colour in the right column #attributes-table upper_lower # foreground colour in the upper square and background colour in the lower square # The contraction-table directive specifies which contraction table to use. # Relative paths are anchored at "/etc/brltty/Contraction". If not specified, no # contraction table will be available. # (can be overridden with the -c [--contraction-table=] option) #contraction-table af # Afrikaans (contracted) #contraction-table am # Amharic (uncontracted) #contraction-table de-basis # German (uncontracted) #contraction-table de-kurzschrift # German (contracted - 1998 standard) #contraction-table de-vollschrift # German (basic contractions) #contraction-table en-ueb-g2 # English (Unified English Braille, grade 2) #contraction-table en-us-g2 # English (US, grade 2) #contraction-table es # Spanish (grade 2) #contraction-table fr-abrege # French (contracted) #contraction-table fr-integral # French (uncontracted) #contraction-table ha # Hausa (contracted) #contraction-table id # Indonesian (contracted) #contraction-table ja # Japanese (uncontracted) #contraction-table ko-g1 # Korean (grade 1) #contraction-table ko-g2 # Korean (grade 2) #contraction-table ko # Korean (uncontracted) #contraction-table mg # Malagasy (contracted) #contraction-table mun # Munda (contracted) #contraction-table nl # Dutch (contracted) #contraction-table ny # Chichewa (contracted) #contraction-table ipa # International Phonetic Alphabet #contraction-table pt # Portuguese (grade 2) #contraction-table si # Sinhalese (uncontracted) #contraction-table sw # Swahili (contracted) #contraction-table th # Thai (contracted) #contraction-table zh-tw # Chinese (Taiwan, uncontracted) #contraction-table zh-tw-ucb # Chinese (Taiwan, Unique Chinese Braille) #contraction-table zu # Zulu (contracted) ############################# # Braille Driver Parameters # ############################# # The braille-parameters directive passes non-generic parameters through # to the braille driver. # (can be overridden with the -B [--braille-parameters=] option) #braille-parameters driver:parameter=setting,... # Alva Braille Driver Parameters #braille-parameters al:SecondaryRoutingKeyEmulation=no # [no,yes] # BrlAPI Braille Driver Parameters #braille-parameters ba:Auth=/etc/brlapi.key #braille-parameters ba:Host=:0 # BrailleLite Braille Driver Parameters #braille-parameters bl:BaudRate=9600 # [300,600,1200,2400,4800,9600,19200,38400] #braille-parameters bl:KbEmu=yes # [yes,no] # Baum Braille Driver Parameters #braille-parameters bm:Protocols=default # [default,all,native] #braille-parameters bm:VarioKeys=no # [no,yes] # EuroBraille Braille Driver Parameters #braille-parameters eu:Protocol= # [auto,azerbraille,clio,eurobraille,notebraille,pupibraille,scriba,esys,esytime,iris,esysiris] # HandyTech Braille Driver Parameters #braille-parameters ht:SetTime=no # [no,yes] # Iris Braille Driver Parameters #braille-parameters ir:Embedded= # [no,yes] #braille-parameters ir:LatchDelay=10 # [0-100] (tenths of a second) #braille-parameters ir:Protocol= # [eurobraille,native] # Libbraille Braille Driver Parameters #braille-parameters lb:Device=/dev/ttyS0 # #braille-parameters lb:Driver=auto # #braille-parameters lb:Table=us.tbl # # TSI Braille Driver Parameters #braille-parameters ts:HighBaud=yes # [no,yes] #braille-parameters ts:SetBaud=9600 # [4800,9600,19200] # TTY Braille Driver Parameters #braille-parameters tt:Baud=9600 # #braille-parameters tt:CharSet=ISO8859-1 # #braille-parameters tt:Columns=40 # [1-80] #braille-parameters tt:Lines=1 # [1-3] #braille-parameters tt:Locale= # #braille-parameters tt:Term=vt100 # [terminfo] # VisioBraille Braille Driver Parameters #braille-parameters vs:Baud=57600 # #braille-parameters vs:DisplaySize=40 # [20-40] #braille-parameters vs:PromVersion=4 # [3-6] # XWindow Braille Driver Parameters #braille-parameters xw:Columns=40 # [1-80] #braille-parameters xw:Font=name # [] #braille-parameters xw:Input=off # [off,on] #braille-parameters xw:Lines=1 # [1-3] #braille-parameters xw:Model=bare # [bare] #braille-parameters xw:TkParms= # ########################### # Generic Speech Settings # ########################### # The speech-driver directive specifies the two-letter driver # identification code of the driver for the speech synthesizer. # If not specified, autodetection will be performed. # If more than one driver, separated by commas, is specified, # then autodetection will be performed amongst them. # (can be overridden with the -s [--speech-driver=] option) #speech-driver auto # autodetect #speech-driver al # Alva #speech-driver an # Android (text to speech engine) #speech-driver bl # BrailleLite #speech-driver cb # CombiBraille speech-driver es # eSpeak (text to speech engine) #speech-driver fl # FestivalLite (text to speech engine) #speech-driver fv # Festival (text to speech engine) #speech-driver gs # GenericSay (pipes to /usr/local/bin/say) #speech-driver mp # Mikropuhe (text to speech engine) #speech-driver sd # SpeechDispatcher (text to speech server) #speech-driver sw # Swift (text to speech engine) #speech-driver th # Theta (text to speech engine) #speech-driver vv # ViaVoice (text to speech engine) #speech-driver xs # ExternalSpeech (executes /usr/local/bin/externalspeech) # The speech-input directive specifies the name of the file system object # (FIFO, named pipe, named socket, etc) which can be used by external # applications for text-to-speech conversion via BRLTTY's speech driver. # Relative paths are anchored at the current working directory. If not # specified, the file system object isn't created. # (can be overridden with the -i [--speech-input=] option) #speech-input /path/to/file-system-object ############################ # Speech Driver Parameters # ############################ # The speech-parameters directive passes non-generic parameters through # to the speech driver. # (can be overridden with the -S [--speech-parameters=] option) #speech-parameters driver:parameter=setting,... # eSpeak Speech Driver Parameters speech-parameters es:MaxRate=250 #speech-parameters es:Path= #speech-parameters es:PunctList= speech-parameters es:Voice=fr # ExternalSpeech Speech Driver Parameters #speech-parameters xs:Program=/usr/local/bin/externalspeech #speech-parameters xs:Uid=65534 #speech-parameters xs:Gid=65534 # Festival Speech Driver Parameters #speech-parameters fv:Command=festival # [/path/to/command] #speech-parameters fv:Name= # [kevin,kal] # FestivalLite Speech Driver Parameters #speech-parameters fl:Pitch=100 # [50-200] # GenericSay Speech Driver Parameters #speech-parameters gs:Command=/usr/local/bin/say # Mikropuhe Speech Driver Parameters #speech-parameters mp:Name= # [/path/to/mikropuhe/name.pu5] #speech-parameters mp:Pitch=0 # [-10-10] # SpeechDispatcher Speech Driver Parameters #speech-parameters sd:Language=fr # [two-letter language code] #speech-parameters sd:Module=espeak-mbrola-generic # [flite,festival,epos-generic,dtk-generic,...] #speech-parameters sd:Port=6560 # [1-65535] # [1-65535] #speech-parameters sd:Voice=female1 # [male1,female1,male2,female2,male3,female3,child_male,child_female] # Swift Speech Driver Parameters #speech-parameters sw:Name= # [voice,/path/to/voice] # Theta Speech Driver Parameters #speech-parameters th:Age= # [1-99,-1--99] #speech-parameters th:Gender= # [male,female,neuter] #speech-parameters th:Language= # [two-letter language code] #speech-parameters th:Name= # [voice,/path/to/voice] #speech-parameters th:Pitch=0.0 # [-2.0-2.0] # ViaVoice Speech Driver Parameters #speech-parameters vv:IniFile=/usr/lib/ViaVoiceTTS/eci.ini #speech-parameters vv:SampleRate= # [8000,11025,22050] #speech-parameters vv:AbbreviationMode= # [on,off] #speech-parameters vv:NumberMode= # [word,year] #speech-parameters vv:SynthMode= # [sentence,none] #speech-parameters vv:TextMode= # [talk,spell,literal,phonetic] #speech-parameters vv:Language= # [AmericanEnglish,BritishEnglish,CastilianSpanish,MexicanSpanish,StandardFrench,CanadianFrench,StandardGerman,StandardItalian,SimplifiedChinese,BrazilianPortuguese] #speech-parameters vv:Voice= # [AdultMale,AdultFemale,Child,ElderlyFemale,ElderlyMale] #speech-parameters vv:VocalTract= # [male,female] #speech-parameters vv:Breathiness= # [0-100] #speech-parameters vv:HeadSize= # [0-100] #speech-parameters vv:PitchBaseline= # [0-100] #speech-parameters vv:PitchFluctuation= # [0-100] #speech-parameters vv:Roughness= # [0-100] ##################### # Keyboard Settings # ##################### # The keyboard-table directive specifies which keyboard table to use. Relative paths are # anchored at "/etc/brltty/Keyboard". If not specified, no keyboard table is used. # (can be overridden with the -k [--keyboard-table=] option) #keyboard-table braille # bindings for braille keyboards #keyboard-table desktop # bindings for full keyboards #keyboard-table keypad # bindings for keypad-based navigation #keyboard-table laptop # bindings for keyboards without a keypad #keyboard-table sun_type6 # bindings for Sun Type 6 keyboards # The keyboard-properties directive specifies which keyboards to monitor. # If not specified, all keyboards are monitored. # (can be overridden with the -K [--keyboard-properties=] option) #keyboard-properties Type=any # [any,ps2,usb,bluetooth] #keyboard-properties Vendor=0X0000 # [0X0000-0XFFFF] #keyboard-properties Product=0X0000 # [0X0000-0XFFFF] ################## # Sound Settings # ################## # The pcm-device directive specifies the device to use for soundcard # digital audio. If not specified, a method- and system-dependent # default will be used. # (can be overridden with the -p [--pcm-device=] option) #pcm-device /path/to/device # most methods #pcm-device pcm-handle-id # ALSA (see second parameter of snd_pcm_open) # The midi-device directive specifies the device to use for the Musical # Instrument Digital Interface. If not specified, a method- and # system-dependent default will be used. # (can be overridden with the -m [--midi-device=] option) #midi-device /path/to/device # most methods #midi-device client:port # ALSA (may use number or case-sensitive substring of name) ########################## # Miscellaneous Settings # ########################## # The preferences-file directive specifies the file in which to save the user's # preferences. Relative paths are anchored at "/var/lib/brltty". If not # specified, "brltty.prefs" will be used. # (can be overridden with the -F [--preferences-file=] option) #preferences-file brltty.prefs # The log-level directive specifies the severity threshold for diagnostics # written to the system log. Less severe diagnostics will not be logged. If not # specified, "notice" will be used. # (can be overridden with the -l [--log-level=] option) #log-level emergency #log-level alert #log-level critical #log-level error #log-level warning #log-level notice #log-level information #log-level debug # The log-file directive specifies the file to which diagnostics are written. # Relative paths are anchored at the current working directory. If not # specified, diagnostics are written to the system log. # (can be overridden with the -L [--log-file=] option) #log-file /tmp/brltty.log # The drivers-directory directive specifies the absolute path to the # directory which contains the dynamically loadable drivers. If not # specified, /lib/brltty will be used. # (can be overridden with the -D [--drivers-directory=] option) #drivers-directory /lib/brltty # The writable-directory directive specifies the absolute path to a directory # which can be written to (creation of missing but needed resources, etc). If # not specified, "/var/run/brltty" will be used. # (can be overridden with the -W [--writable-directory=] option) #writable-directory /var/run/brltty # The tables-directory directive specifies the absolute path to the directory # which contains the text, attributes, contraction, keyboard, and input tables. # If not specified, "/etc/brltty" will be used. # (can be overridden with the -T [--tables-directory=] option) #tables-directory /etc/brltty ################################################ # Application Programming Interface Parameters # ################################################ # The no-api directive disables the Application Programming Interface (API). # (can be overridden with the -N [--no-api=] option) #no-api off # [off,on] # The api-parameters directive passes parameters to the Application # Programming Interface. # (can be overridden with the -A [--api-parameters=] option) #api-parameters parameter=setting,... #api-parameters Auth=keyfile:/etc/brlapi.key # Require authentication key #api-parameters Auth=user:joe # Allow some local user #api-parameters Auth=group:brl # Allow some local group #api-parameters Host=:0 # Accept only local Unix connections #api-parameters Host=0.0.0.0:0 # Accept any internet connection. #api-parameters StackSize=65536 ########################### # Generic Screen Settings # ########################### # The screen-driver directive specifies the two-letter driver # identification code of the driver for the console screen. # (can be overridden with the -x [--screen-driver=] option) #screen-driver an # Android #screen-driver as # AtSpi #screen-driver a2 # AtSpi2 #screen-driver hd # Hurd #screen-driver lx # Linux #screen-driver pb # PCBIOS #screen-driver sc # Screen #screen-driver wn # Windows ############################ # Screen Driver Parameters # ############################ # The screen-parameters directive passes non-generic parameters through # to the screen driver. # (can be overridden with the -X [--screen-parameters=] option) #screen-parameters driver:parameter=setting,... # AtSpi Screen Driver Parameters #screen-parameters as:Type=text+terminal # [text,terminal,all] # Linux Screen Driver Parameters #screen-parameters lx:Charset=name+... # [] #screen-parameters lx:DebugSfm=no # [no,yes] #screen-parameters lx:Hfb=auto # [auto,vga,fb,0-7] # Windows Screen Driver Parameters #screen-parameters wn:Root=no # [no,yes] #screen-parameters wn:FollowFocus=yes # [yes,no]